Tag Archives: Ollin Board Company

Why I Built a Carbon Fiber Electric Skateboard Mini Cruiser


Shot exclusively with the LanParte LA3D Action Gimbal, DJI Phantom 3 and Polar Pro Filters

My original DIY Electric Mini Cruiser Skateboard still holds up quite nicely even after 6 months of hard riding and natural wear and tear. But as with all things DIY, parts can always be upgraded. One key feature that I wanted to improve upon was weight, so once again, I researched the right combination of components to make an already awesome commute even better. I’ve nicknamed this build – the A2ESK8 Mini Cruiser.

hi5ber02

My original 29″ mini cruiser was the perfect size thanks to the unique design of the now discontinued Jet Spud deck. But I wanted to do something different, which is why I chose the Hi5ber Ion 30 mini cruiser deck. Hi5ber has built a great reputation for manufacturing the best carbon fiber longboard decks available. They are lighter and stronger than typical wooden longboards which create a more controlled, responsive experience for the rider.

hi5ber01

The Ion 30’s design is the definition of stealth with it’s ultra thin rails that gradually curve thicker towards the wheelbase. The added benefit is an enhanced wheel clearance that looks so damn futuristic. Other than the low weight, the characteristics of the Ion 30 include high rigidity, high tensile strength, corrosion resistance and fatigue resistance. And unlike wood, carbon fiber doesn’t warp when exposed to water.

ion30
product information button runplayback Hi5ber Carbon Fiber Ion 30

hi5ber_sidewinder

Before electricfying the Ion 30, I tested it out with Gullwing Sidewinder II trucks alongside 72mm ABEC11 Freerides and it was a blast. That combination of an ultra lightweight carbon fiber deck and double kingpins was so much fun I was a little hesitant to throw electronics on there. But my curiousity got the best of me so I got to work.

battery01

The next step in weight reduction was the battery. My original build contained the 10s3p Enertion Space Cell, a wonderful battery pack, but 30 cells demand a lot of real estate in the wheelbase for a small mini cruiser deck. With a wheelbase of 16.25″ on the Hi5ber, I knew I had to figure out another power solution.

battery03

I ended up creating a custom 12s1p LiFePO4 battery pack with the help of my friend Landon who is an electronics wizard. LiFePO4 batteries are the safest type of lithium batteries as they will not overheat, and even if punctured they will not catch on fire. The cathode material in LiFePO4 batteries is not hazardous, and poses no negative health or environmental hazards. Due to the oxygen being bonded tightly to the molecule, there is no danger of the battery erupting into flames like there is with lithium-ion. We used 12 cells in series for a total voltage of about 36v. Paired with a BMS, voltage display, charge port and power button, the pack ended up having a more compact size – perfect for the Hi5ber deck.

battery02

Once again I designed a custom 1/8″ ABS enclosure using my homemade vacuum former. This time I wanted the buttons to be located on the side of the enclosure as flush as possible. This created a more pleasing appearance that complimented the look of the carbon fiber. The length of the enclosure came out to 11″ and width at 5″. This meant plenty of room to spare on the Ion 30 wheelbase.

apone01
product information button runplayback A2ESK8 Apone V1 Electric Skateboard Enclosure

nano_remote

Another big upgrade I made was swapping my original Torqueboards 2.4ghz Mini Remote with an even smaller 2.4ghz Nano Remote that features a thumb throttle instead of a trigger throttle. As far as how it feels in my hand, it’s pretty awesome. Granted, I’m not a big guy but it’s the right size for stealth in the city. It’s as if they took the best features of the Yuneec EGO and Boosted Boards remote and put it into a no frills casing. I like the short throw, knob throttle which is a much better design than Boosted’s long throw thumb dial and trigger button. Shout out to Kaly over at ESK8 builders for the hookup on this remote.

ollinboard01

The only components I ported over from my original build are the Ollin Board VESC and the Carvon V2 Single Hub Motor. Because of months of wear and tear and a few moisture issues, Landon and I decided it was best to clean the VESC up with some gentle scrubbing and a coating of anti-corrosion spray. Even so, the VESC is still going strong with no issues or errors – a testament to Ollin Board’s high quality manufacturing practices.

mini01

My Carvon V2 Single Hub Motor was upgraded with authentic 90mm ABEC11 Flywheels and is really the backbone of my entire mini cruiser build. I’ve put the hub motor through the ringer in every harsh road condition imaginable and it continues to perform flawlessly. Carvon continues to push the boundaries of eboard drive trains and I look forward to seeing what they do next with their V3 hub motor design and EVO series.

mini02

Dialing in the VESC settings is critical for creating a safe and fun mini cruiser. My original build was capable of hitting 31 mph but the sweet spot for a board this small is around 15-18 mph – more than enough for carving through a dense city filled with intersections and pedestrians. Also, the 12s LiFePO4 battery delivers a stronger punch than my 10s lithium ion with a more stable discharge and minimal voltage sag. As much as I enjoy releasing the full power and speed from a DIY eboard, there’s something quite satisfying about taming a mini cruiser eboard that has the ability to hurl you but won’t because you’re keeping it on a leash. More importantly, this build never feels like it’s struggling or straining and that kind of confidence transfers into longer range and fun, safer rides.

mini03

Skating the A2ESK8 Mini Cruiser around the city proved to be a blast. On FOC mode with the Carvon V2 hub motor, the sound is nearly silent. The ultra light Hi5ber Ion 30 board makes acceleration from standstill fantastic and it really feels like your riding on some kind of space age material because of how responsive it is. Carbon fiber handles bumps slightly differently than wooden decks but in a good way because vibrations don’t transfer as much harsh energy to your body. Oh and did I mention how light this thing is? Seriously I’ll take carbon decks over wood any day of the week.

mini04

DIY electric skateboard builds have been getting better and better in just a few months yet there are still just a handful of 30″ and under DIY mini cruiser builds. Perhaps it’s a bit of a stigma to purposely limit your top speed on a smaller deck but I feel like it’s our responsibility to be ambassadors of this technology everytime we step on a board. I’ve already seen friends who’ve hurt themselves on eboards and in almost all cases, the problem was either an inexperienced rider or a road obstacle and not a board failure. Going over 25 mph instead of 13 mph on a non electric board meant crashes that have caused broken bones and serious concussions. Believe me, I’ve had first hand experience with this and it’s made me a very visible advocate for eboard helmet safety.

makerfaire

This mini cruiser was not designed to be a land missile and it shows. It’s become the ultimate conversation starter whenever I ride in the city because I’m seriously just having fun. The weight reduction made a huge difference and carrying it on public transportation is even easier. If you’re in the Detroit area at the end of July, check out this mini cruiser build in person at the Detroit Maker Faire where will have an A2ESK8 booth and demonstrations. For more information on the products I used to create the video above, please check out the links below.

group

lanparte_bh
product information button runplayback Lanparte LA3D Detachable 3-Axis Handheld Gimbal

polarpro
product information button runplayback Polar Pro GoPro Frame 2.0 Professional Filter 6 Pack

I Built Another DIY Electric Longboard With More Power

V2_05

My original DIY Electric Skateboard is quite possibly one of my favorite things I’ve built so far and the feedback has been phenomenal. Every ride is an opportunity to discover inventive ways to capture the board on video. However, the communal experience of riding with other people is where the real fun begins. The performance gap between my DIY Single Hub Eboard and my Yuneec EGO is too wide so the only solution was to build another board. Do I really NEED more than one? Absolutely not. But the shared experience of riding with others is priceless.

20160313_203655

DOING THE DUAL

I had the option to either replicate my original DIY Single Hub or go for something a little different. Perhaps a single belt drive or a dual setup. I ended up choosing a dual hub motor system. There’s a bit of a perpetual debate on belt drive vs. hub motors and it always comes down to personal preference. The stealth and coasting ability of the Carvon Single Hub is incredible. But the best feature to me is that it can withstand some of the harshest conditions imaginable. Harsh conditions during a Michigan Winter include rock salt, potholes, uneven pavement, snow, black ice, etc. Once I decided on using Carvon Dual Hubs for my next build, choosing the rest of my parts was fairly simple.

CHOOSING THE PARTS

20160207_104826

JET TOMAHAWK “PEACE OUT” DECK
I knew this build would not be a mini cruiser like my last one, but I loved the quality of my Jet deck so I wanted to find something similar but with a longer wheelbase. I ended up going for the Jet Tomahawk because of it’s freeride design and variable wheelbase from 23.75″ to 28.25″. The Tomahawk shares similar wheel wells like my Jet Spud but has more of an aerodynamic, missle-like shape. When it comes to choosing a deck, Muirskate is a great resource for all things longboards. Shout out to Scott!

Price: $79.95

tomahawk
Jet Tomahawk “Peace Out” Deck

20160221_211242

CARVON V2 DUAL HUB MOTOR + MATCHING TRUCKS + WHEELS SET
As I mentioned, the durability of the Carvon Hub is what did it for me. Jerry at Carvon knew how much fun I was having on a single hub but said a dual would be even more of a blast. Since I pretty much committed to a big boy board, I ended up going with massive 97mm wheels which is recommended for 10s-12s Li-Po packs. Like last time, the Carvons arrived on time with a clean, professional build all around – heavy duty 2250W brushless outrunner motors, 10″ black trucks with matching black anodized motor sleeves and ceramic bearings. There’s been some questions about why the motor isn’t completely hidden inside of the urethane and I would assume it’s to create the actual feel of riding on a wheel as opposed to riding on a motor. I haven’t tried the thin urethane hubs on an Inboard or Stary but I’d be hesitant about riding those anywhere but pristine, paved roads in California. Where I’m from, the roads are tough and I have no hesitation blasting through them with Carvons.

Price: $599

carvon02
Carvon V2 Dual Hub Motors + Matching Trucks + Wheels Set

20160309_212606

ENERTION 10S SPACE CELL BATTERY
The Enertion 10S Space Cell has been so reliable and convenient that getting another one was no question. I haven’t had the chance to perform any range tests yet but it’s more than enough juice for a full day of riding on single hub and it will be interesting to compare the duration with a dual hub. The new version of the Space Cell also features an improved power switch and Jason’s customer service is top notch.

Price: $343.38

enertion02
Enertion 10S Space Cell Battery

20160309_212747

OLLIN BOARD COMPANY VESC – OPEN SOURCE ESC SPEED CONTROLLER
I doubled down on the Ollin Board Company’s VESC, still the best electronic speed controller created specifically for electric skateboards by Benjamin Vedder. Like I said, I’ve been riding hard in single digit Michigan weather in some of the most adverse conditions ever and have had no problems with the VESC at all. Honestly I don’t even think about it, which is a testament to the quality (heavy duty wiring, clean soldering, military grade, gold plated PCB’s, firmware testing) and is also coated for moisture and corrosion protection. The price on the Ollin Board VESC has gone up a bit but with the warranty and repair guarantee, it’s well worth it. Also be sure to pick up a CANBUS Connector to power the VESC’s together.

Price: $165

ollinboard02
VESC – Open Source ESC Speed Controller

Price: $5

canbus
CANBUS Connector for VESC

y-harness

FLITE TEST XT60 POWER Y-HARNESS
This 14AWG Y-Harness comes with presoldered XT60 connectors and is used to connect the dual VESC’s to the Space Cell.

Price: $7

y-harness
Flite Test XT60 Power Y-Harness

diyelectric01

TORQUEBOARDS 2.4GHZ MINI REMOTE CONTROLLER
Once again, I went with TorqueBoards 2.4Ghz Mini Remote from DIY Electric Skateboard. I’ve dropped it a few times and it’s still going strong. And it really does seem to last forever on only 2 double A batteries.

Price: $50

diyelectric02
TorqueBoards 2.4Ghz Mini Remote Controller

V2_01

V2_02

V2_03

20151227_102520

MISCELLANEOUS
Some odds and ends that I needed to complete my build.

$4.95 – Khiro 1/4″ Shock Pad Large Skateboard Risers

$4.95 – DBS Dank Bolts 1.25″

$6.19 – CCNS Neoprene Sheet 1/4” 12″x12″ Self-Adhesive

2 x $1.18 – 2 x #8-32 x 1 in. Phillips Flat-Head Machine Screws (5-Pack)

2 x $1.18 – 2 x #8-32 Stainless Steel Machine Screw Nut (4 per Pack)

$1.18 – #8 Zinc-Plated Steel Flat Washer (30-Pack)

THE ASSEMBLY

20160207_110820

20160207_132852

Like last time, I prepped the Jet Tomahawk deck by sanding away the paint job and spray painting it with glossy black. Covering those raw wooden wheel wells also looks a little better in my opinion.

20160313_205332

Once the VESC’s arrived I programmed it with the BLDC Tool here and tweaked some of the settings based on my previous build. A few things changed when switching over to a dual configuration. Here’s my settings that I used for each VESC.

MOTOR CONFIGURATION
Motor Max: 60.00
Motor Min: -30.00
Bat Max: 15.00
Batt Min (Regen): -12.00
Absolute Max: 130.00

CURRENT CONTROL
Startup Boost: 0.030

APP CONFIGURATION – GENERAL
Controller ID: Input “0” for VESC 1 and “1” for VESC 2
Enable Send status over CAN
Enable PPM

APP CONFIGURATION – PPM
Enable Multiple ESCs over CAN
Enable Traction Control

20160313_205311

Then, I binded the TorqueBoards remote to the receiver. Be sure to bind it properly to enable fail safe. If not, the board will go full throttle when you turn off the remote which is a major safety hazard. Next I added a JST cable to VESC 1 and the CANBUS Connector to connect VESC 1 and VESC 2. I also added some hotglue to all the connectors to prevent the connection from coming loose. Finally I added some velcro on the bottom of the VESC’s and the receiver. This will keep things secure inside of the enclosure.

20160313_205558

Next I prepped the Enertion Space Cell battery by adding velcro to the top. I found three strips placed equally across the length of the battery was enough.

20160313_205301

On the other side I added weatherstripping as a cushion. This side faces the skateboard deck so it’s important to have a little bit of cushioning to guard against vibrations.

20160313_205514

Next I prepped the RunPlayBack enclosure with corresponding velcro strips for the battery, VESC and receiver. I’m really happy with the size of this enclosure and the two piece design. Everything fits like a glove, especially the VESC’s.

20160313_205018

I carefully placed the Space Cell into the enclosure, making sure to align the power button, charge port and voltage display with the corresponding holes and connected the VESC’s with the Y-Harness. I also added a small flap of rubber as a cover.

20160313_203605

The Carvon Hub Motor and wheels were next. I picked up some 1/4″ Khiro shock pads and 1.24″ DBS Dank Bolts to mount the trucks to the deck. Finally, with everything in place I secured the enclosure using #8-32 machine screws, washers and nuts from Home Depot.

20160313_203938

CONCLUSION

Although my original DIY single hub eboard gave me the confidence to attempt another build, moving up to a dual build was no simple task. By doubling the major components, everything had to be bigger and beefier – from the choice of my deck to wheelsize to the enclosure. Once complete, I realized I created a beast – a literal land missle that dwarfs the nimbleness of my single hub board. I’m not quite sure I could use this as a daily cruiser but for the times when I have a lot of open road to let loose, this is the perfect build, especially as a weekend warrior.

20160313_203706

However, no matter how you slice it, moving up to a dual build isn’t cheap. Doubling the price of a VESC and hub motor presents a challenging value for those who are looking to get into DIY. Starting on a single hub build is more affordable and will definitely give you the confidence to move into a dual build if you crave more power.

20160313_203830

In my first article, I said that building a DIY electric board made me a better person and I still believe it. In only 2 months I’ve been able organize a local DIY eskate group called A2ESK8, engage in interesting conversations with the online DIY community as well as local tech and maker folks who find electric longboards fascinating. Right now the big barrier of entry is the price. But like drones and other electric vehicles, once manufacturing costs go down and battery technology improves, eboards will become more accessible. Until then, pushing the limits of emerging technologies is a blast and now that I have a second board, it will make that experience even better. So whose ready to ride? #A2ESK8

My DIY Electric Skateboard Hit 31mph!

Here’s another cruising video with my DIY Electric Skateboard. This time we hit 31mph on the Carvon V2 Single Hub Motor. Pretty sure that once we find some paved asphalt we can go even faster. Till then, stay tuned!

carvon02
Carvon V2 Single Hub Motor + Matching Trucks + Wheels Set

enertion02
Enertion 10S Space Cell Battery

ollinboard02
VESC – Open Source ESC Speed Controller

sulaco03
RunPlayBack Sulaco V1 Enclosure

How I Built a DIY Electric Skateboard and Became a Better Person

rik01

Full disclosure – as a kid, I’ve always enjoyed cruising around on a skateboard, mainly because I was terrible at doing tricks and too worried about getting hurt. Naturally, I gravitated towards computers and electronic hobbies from RC cars to drones and eventually Miniquad FPV racing. Fast forward to present day – the popularity of personal electronic vehicles has grown and with it – the electric skateboarding community which combines the gratification of DIY tinkering with a broader communal experience.

first-skateboard

My earliest memories of electric skateboards were of metal behemoths fitted with lead batteries like something out of a science fiction movie. These days, parts have gotten smaller and slimmer which have allowed manufacturers such as Boosted and Yuneec to carve a out a very unique market of consumers who are not just skaters or tech nerds but those who are looking for alternate modes of transportation. To be fair, someone using an electric skateboard for the first time looks pretty ridiculous but those who fully embrace the technology make it look they are having more fun in life than everyone else.

rik-ego

YUNEEC EGO

I was first introduced to the Yuneec E-GO by Emm from Cheesycam. Paired with a gimbal, we used it as a camera dolly for super smooth tracking shots. While the experience was fun, I didn’t have an immediate gut reaction to purchase, which is what typically happens when Emm shows off some new gear. I was intrigued, but the price point kept me at a distance. It felt a little gimmicky, like a big boy toy for guys my age who don’t like to hurt themselves.

ego
Yuneec E-GO

ego01

After about a year, I started seeing electric vehicles crop up around town and I began to feel left out. I was compelled to get my own big boy toy. And since I live about 2 1/2 miles away from my office, I figured an eboard would be the perfect way to commute. So with a little money saved I bought a used Yuneec E-GO display unit from eBay and immediately customized it with a new paint job and lights.

ego02

The E-GO is a rock solid entry level board, perfect for those who want to get their feet wet with electric skateboarding with little maintenance. Ask any hardcore DIY eboard builder and the Yuneec is not really a part of the conversation. But compared to a Boosted board, the E-GO has a very pleasant price tag for it’s components – nothing more, nothing less. It maxes out at 13mph which is slow for most but very reasonable for downtown city commuting where there’s more obstacles, unpredictable terrain and limited straightaways.

diy-tools

DIY ELECTRIC SKATEBOARDING COMMUNITY

Initially I thought about upgrading the E-GO to push it’s performance but after some research, it felt a little risky to modify a board whose only fault was being reliable. Like I never felt “cheated” by the E-GO if that makes sense. Plus having a production board to study for design research is always a good thing. Next, I started lurking in the Endless Sphere and ESK8 Builders forums, a cornucopia of knowledge for all things related to electric skateboarding. One thing that stood out to me was the pleasant attitude exhibited by many of the stakeholders in the community. Compared to some of the guys in Miniquad FPV groups, this was like a breath of fresh air. This is how I took my first plunge into DIY eboards.

dremel

FINDING THE PARTS

Every DIY eboard currently relies on components developed by many companies springing up to serve the market. These companies are developing batteries, writing code, engineering motor systems and figuring out pieces of technology at every point in between. This is a constantly evolving scene with DIY’ers providing some valuable nugget of R&D research hidden in posts across two major forums. It’s deep, but not alienating if you dedicate the time. With about a month of lurking, I felt I was caught up with the technology to make informed purchases. One thing to keep in mind is that many of these products are built by DIY’ers for DIY’ers which means its best to do your homework before hitting them with a barrage of questions. This isn’t like shopping for a sweater at Macy’s. Like all communities, it pays to play.

support

Supporting these guys with a purchase or two puts your skin in the game and as a customer they will give you personal attention and support for your build. You’ll need to have patience as products are made to order. My expected delivery times were off by about a week or two but since I placed my orders before Christmas and New Year, it was understandable. Waiting is hard. Really hard. But on the flipside, having something made to order feels special. Essentially, having a good customer attitude can mean the difference between someone going through the motions, versus someone really giving that extra attention to detail and a once over for quality control. I won’t get too wrapped up in specific components as parts will evolve way past what this article can provide but I can detail what informed my purchases which are entirely shaped by my personal needs.

jet01

CHOOSING THE PARTS

JET RADAR SERIES SPUD NIPS LIP DECK
I found this board through posts by Torqueboards and Siggs from ESK8 Builders. It’s 29″ length with a 21.25″ wheelbase seemed like the perfect size for my body dimensions and commuting distance. The nearly 40″ length of the Yuneec E-GO was comfortable but definitely a hassle for taking it on a bus or other form of public transportation. One thing that worried me was the rather large wheel wells and extreme concave but more on that later.

Price: $65.95

jet02
Jet Radar Series Spud Nips Lip Deck

carvon01

CARVON V2 SINGLE HUB MOTOR + MATCHING TRUCKS + WHEELS SET
To stay within my parameters of a stealthy, low key look, I went with a single hub motor from Jerry at Carvon. Carvon’s website FAQ answered all of my questions in regards to the advantages of hub motors and up to date photos of customer builds. Jerry was really helpful with shipping times and let me know that mounting the Carvon on the 29″ Jet Spud deck was possible but challenging due to the short wheelbase. Not one to shy from a challenge, I placed my order a week later and when it arrived, the product looked even better in person than the pictures. This may seem like common sense but being on the fence or wishy washy can only go so far when it comes to DIY. Once you soft commit to a purchase, be honest and follow through. It goes a long way to establishing a solid customer relationship.

Price: $299.00

carvon02
Carvon V2 Single Hub Motor + Matching Trucks + Wheels Set

enertion01

ENERTION 10S SPACE CELL BATTERY
Jason at Enertion Boards has been developing and innovating within the electric skateboard scene for quite some time and it shows. From complete builds to individual components, Enertion is proof of concept that DIY and ready to run solutions can co-exist peacefully. So when it came time to choose a power solution, I knew the Enertion Space Cell was the best bang for the buck hands down. Without getting too deep into battery comparisons, the 10S Space Cell is a self contained unit with a battery management system, power button, charging port and voltage display. Jason was also kind enough to give me advice on my components, measurement specs for my enclosure and overall encouragement to see my build through. It’s almost like he’s on a personal mission to outfit every man, woman and child on earth with an electric skateboard and I look forward to where he takes Enertion by next year.

Price: $314.87

enertion02
Enertion 10S Space Cell Battery

ollinboard01

OLLIN BOARD COMPANY VESC – OPEN SOURCE ESC SPEED CONTROLLER
The VESC is currently the best electronic speed controller created specifically for electric skateboards by Benjamin Vedder. Jeramiah at Ollin Board Company was another helpful resource for providing recommended settings on my build and constant updates on the VESC’s features. Once it arrived, the VESC quality was top notch with heavy duty wiring and clean soldering all around. Like a master chef preparing an expensive meal, Jeramiah uses military grade, gold plated PCB’s along with a re-flow oven for soldering components and various stages of firmware testing to ensure maximum efficiency.

Price: $120.00

ollinboard02
VESC – Open Source ESC Speed Controller

diyelectric01

TORQUEBOARDS 2.4GHZ MINI REMOTE CONTROLLER
I wanted an affordable, reliable, small remote so I went with this TorqueBoards 2.4Ghz Mini Remote from DIY Electric Skateboard. It isn’t fancy and is not really in the same league as slick production board remotes but it seems to last forever on 2 double A batteries and well – it just works like hell. With it’s small compact receiver, zero dropouts and transmission errors, this remote had my attention but now has my confidence. TorqueBoards is also very active on social media so sharing your build with him there is a quick and easy way to get immediate feedback.

Price: $50.00

diyelectric02
TorqueBoards 2.4Ghz Mini Remote Controller

sulaco01

sulaco02

sulaco03

RUNPLAYBACK SULACO V1 ENCLOSURE
To house all of these electronics I created my own DIY vacuum former oven that was inspired by Psychotiller from Endless Sphere and James Bruton from XRobots. Using feedback from Jason at Enertion and Jeramiah at Ollin Board Company, I created an enclosure code named the Sulaco V1 that is designed to house the Enertion 10S Space Cell, a single VESC and a standard 2.4ghz receiver. No more, no less. The specs are L: 20″ W: 8″ H: 2″ and features 1/8″ thick ABS plastic for lightweight performance, flexiblity high impact resistance, and added durability. Since I live right next door to a major ABS plastic supplier I can provide these at a good cost.

Price: $40

sulaco03
A2ESK8 Sulaco V1 Enclosure

shrink

MISCELLANEOUS
Here’s a few odds and ends that I needed to complete my build.

$4.95 – Khiro 1/4″ Shock Pad Large Skateboard Risers

$4.95 – DBS Dank Bolts 1.25″

$13.79 – MOB Grip Super Coarse Longboard 30 Grit 11″x40″ Griptape

$7.99 – 180 pc Rubber Grommet Assortment Set Firewall Wiring Electrical Wire Gasket Kit

$5.95 – 5 Pairs XT60 Male & Female Bullet Connectors Plugs For RC Hobby Lipo Battery

$6.49 – 127pc Heat Shrink Wire Tubing Assortment Wrap Electrical Connection Cable Sleeve

$6.19 – CCNS Neoprene Sheet 1/4” 12″x12″ Self-Adhesive

$4.70 -Small 13 X 23 X 1/16 Mechanics Shop Non Slip Black Rubber Tool Box Drawer Liner

$11.99 – Cowles Products/Black StyleGuard edge trim

2 x $1.18 – 2 x #8-32 x 1 in. Phillips Flat-Head Machine Screws (5-Pack)

2 x $1.18 – 2 x #8-32 Stainless Steel Machine Screw Nut (4 per Pack)

$1.18 – #8 Zinc-Plated Steel Flat Washer (30-Pack)

assembly01

assembly02

THE ASSEMBLY

As I waited for parts I decided to prep my deck by sanding away the sweet Jet Spud Lips design and spray painting it with glossy black. I figured the artwork would be covered with my enclosure so I didn’t feel too bad.

assembly03

assembly04

Next I added the MOB grip tape which is super coarse and probably too extreme for most folks. My hand actually started bleeding laying this stuff down so I threw on some work gloves. Ouch.

bldc01

bldc02

bldc03

Once the VESC arrived I programmed it with the BLDC Tool here and tweaked some of the settings based on the VESC FAQ found on ESK8.

assembly05

Once that was done, I binded the TorqueBoards remote to the receiver, then connected it to the VESC with a JST cable that was provided by Ollin Board Company. I added a ziptie as a cable lock to prevent the connection from coming loose and squeezed some hotglue to both the VESC and receiver for extra safety. Loose connections are a safety hazard so be sure to test the strength of every wire. If it can be pulled out with little force, it’s best to start over and do it right. Also adding some velcro on the bottom of the VESC and receiver will help keep things in place once you house it in the enclosure.

assembly06

Next I prepped the Enertion Space Cell battery by adding velcro to the top. I found three strips placed equally across the length of the battery was enough.

assembly07

On the other side I added a few strips of 1/4″ Neoprene as a cushion. This side faces the skateboard deck so it’s important to have a little bit of cushioning to guard against vibrations.

assembly08

Next I prepped the RunPlayBack enclosure with corresponding velcro strips for the battery, VESC and receiver. I can’t stress how important it is to have an enclosure that fits your electronics like a glove. Everything should be firmly enclosed and not swishing around like loose change in a jar.

assembly09

I carefully placed the Space Cell into the enclosure, making sure to align the power button, charge port and voltage display with the corresponding holes.

assembly10

Next I added the VESC and receiver by first pulling the motor wires through the holes and securing everything into the velcro. Once I was satisfied with the fit, I connected the VESC to the battery and added a small flap of rubber as a cover.

assembly11

You can get creative here and add an entire sheet of neoprene and rubber across the whole enclosure like the Yuneec E-GO battery system. Mileage will vary depending on your deck design and weather proofing needs. I highly doubt I’ll be riding mine through inclement weather so I didn’t go too crazy.

assembly12

The Carvon Hub Motor and wheels were next. I picked up some 1/4″ Khiro shock pads and 1.24″ DBS Dank Bolts to mount the trucks to the deck. Similar to the Yuneec E-GO design, the rubber shock pads are great for added flexibility and a smoother ride.

assembly13

I then mounted it all to the board, ensuring that each screw was tightened equally. I didn’t go crazy here, just wanted to get the tension secure.

assembly14

Finally, with everything in place I secured the enclosure using #8-32 machine screws, washers and nuts from Home Depot. There’s many different ways to mount an enclosure to a deck. Most folks like using tee-nuts for a cleaner finish and as a faster way to pop the enclosure on and off. I personally don’t mind the extra time using nuts and washers and with the crazy curvature of the Jet deck, I needed a little more play in the mounting holes.

assembly15

CONCLUSION

From my initial DIY product inquiries on 12/7/15 to 1/18/16, it took me approximately 41 days to complete the build. Slap on the downtime during holiday season and the process took much longer than expected. Yet the results were well worth it. There were a few times when I hit some speed bumps, particularly in the vacuum forming process where each failed pull felt like I got the wind knocked out of me. Like my brief time spent with Miniquad FPV’s, there were moments that zapped my creative energy. I wondered why was I spending all of my time on a glorified big boy toy while everyone else around me was living in the moment. It’s like, why didn’t I just buy a Boosted Board Dual Plus and call it a day?

rik02

Fortunately, with the help of a loving supportive family and encouragement from friends, this build became more than just some kind of self serving prophecy. With DIY electric skateboards, there’s an immediate gut reaction when you see one. Like the kid inside all of us suddenly leaps through the soul in our eyes and peeks through smiling. Once I tapped back into that emotion, everything made sense. Sharing each technical step with my 6 year old daughter and seeing her wide eyed reaction brought me back to reality. I didn’t make this build for me. I made it for anyone who ever felt weird in school. Who felt more comfortable tinkering on their computers and in their garage than on the football field. The minute you understand you can build something, however you get there, you’ll want to improve it and share it with the world. Once you DIY, you’ll never be the same again. Hit me up in the comments if you’d like to discuss and stay tuned for part 2 where I actually take this thing on the streets.