EV Lifestyle Tech Tips
Category
Controller upgrades, motor upgrades, performance tuning, brake upgrades, and drivetrain improvements.
All Reviews63 reviews
Controllers & Upgrades
March 11, 2026
We swap the Antic’s stock tires for The Float Life Thundercat (front) and Pioneer (rear) plus a 5-in MTE hub, then hit pavement and wet off-road to see what changes: cornering feel, traction, wheelies, and comfort.
February 25, 2026
I started modding the Antic mini e-bike with practical accessories (fenders, rear pegs, tail light, kickstand, bar mirror), then built a simple rear regen brake setup that makes wheelies feel more controllable and helps avoid accidental stoppies.
September 29, 2025
I swapped a FarDriver 72300 into the Yozma IN 10 and tuned it with the app. Here’s how the install went, what settings mattered, and how it changed low-end torque, modes, and real riding feel.
August 30, 2025
My latest Enduro DIY ebike build update: fitting a 72V 30Ah battery in the frame with foam and straps, mounting a FarDriver 72300 controller with BT tuning, choosing MT5 brakes, 17” wheels, and a QS205 3.5T hub motor plan for a quiet, reliable direct-drive setup.
June 25, 2025
Hands-on first impressions of the RFLOXA Hawk31 Pro suspension fork for my DIY enduro e-bike build—what stood out right out of the box, what I’m watching for, and who it makes sense for.
June 5, 2025
My hands-on first impressions of the Enduroebike Garmata frameset and MX2 moto seat—unboxing, fit/finish, comfort, and what to consider before starting a DIY enduro ebike build.
May 30, 2025
I upgraded my 72V Sur Ron with the Torp Motors TC1000 controller and TM25 motor, then put it straight into the dirt for trail riding and a hill climb test. Here’s how it felt, what improved most, and what to consider before you buy.
April 30, 2025
I installed the Torp TC1000 controller and TM25 motor on my 72v Surron and put it through stunt riding, hill pulls, and speed runs. Here’s how it feels, what changed, and what to consider before upgrading.
April 19, 2025
I installed the Maintebikes MT6 6-piston hydraulic brakes on my Freego X2 Pro and compared them to my Magura MT5 setup. Here’s how the lever feel, modulation, and stopping power shook out in real riding.
April 7, 2025
I installed Freego’s updated FarDriver controller on my X2 Pro to fix the limited feel and unlock better acceleration and top speed. Here’s how the install went and how it rides on-road, for testing, and off-road.
February 22, 2025
I installed a GUTS Racing custom seat cover on my EGO Power+ Mini Bike for more grip and a better look. Here’s how the install went and how it feels on real rides.
January 23, 2025
I wrapped my Freego X2 Pro using a precision-sized PDF template and simple vinyl. Here’s how the install went, what I learned, and why this is my favorite budget way to personalize and protect the bike.
January 5, 2025
I installed a set of practical first mods on my 2025 Freego X2 Pro—FarDriver controller access/tune, Magura MT5 brakes, full-twist throttle, riser bars, and more. Here’s what mattered most on real rides, plus links to every part.
November 5, 2024
I swapped my leaking FastAce fork for the RFLOXA Hawk31 Pro on my Surron. Here’s how the install went, what stood out on pavement and off-road, and who this adjustable, progressive-spring fork is best for.
August 31, 2024
I upgraded my EBOX 2.0 with an E-Conic Cycles FarDriver 72300 kit, pre-wire harness, Sur-Ron style throttle, and a 72V-rated motor—then tested speed, throttle feel, and stunt control. Here’s what changed in real riding.
August 4, 2024
I installed Econic Cycles’ plug-and-play FarDriver controller kit on a stock EGO Power+ Mini Bike. Here’s how the install went, what changed on the road, and what to consider before you buy.
July 10, 2024
I upgraded my EGO Power+ Mini Bike’s stock brakes with EV Raceworks master cylinders and tested the feel, modulation, and one-finger stopping. Here’s how the install went and why the bike feels night-and-day better.
July 2, 2024
I installed the EV Raceworks Budget Rear Moto Brake Kit on my Surron to fix fading MTB brakes on a heavier, more powerful build. Here’s how the install/bleed went and how it feels on real roads.
June 20, 2024
I wrapped up the final details on my 72V EGO Power+ Mini Bike build—phase wire separators, lighting, CarPlay speaker, and tuning—then did a proper top-speed run. Here’s how it rides, what I’d change, and who this extreme mod is actually for.
June 4, 2024
I installed the Powerful Lithium upgrade parts on my EGO Power+ Mini Bike—FarDriver controller, 72V battery, and hub motor—then took it out for a first ride. Here’s how the fitment went, what changed on the road, and what I’d tweak next.
June 2, 2024
I tuned my EGO Power+ Mini Bike upgrade with a FarDriver controller alongside E-Conic Cycles—fixing dongle/throttle issues, setting ratios & speed, dialing regen, and getting the display reading correctly.
June 1, 2024
I swapped a 10kW Sotion hub motor into my EGO Power+ Mini Bike with a FarDriver controller. Here’s how the wiring strategy and swingarm fitment went, plus what to expect before you try it.
April 29, 2024
I converted my EGO Power+ Mini Bike toward a supermoto-style street setup with Michelin City Grip 2 tires at Detroit Moped Works. Here’s how the install went, what changed on the ride, and the mods I’m planning next.
April 21, 2024
I installed my first real-world mods on the EGO Power+ Mini Bike—mirror, extended fender, storage, phone mount, brake-sensor tweak, stealth blackout, disc cover, rim Plasti Dip, and a DIY 12V turn-signal lighting setup. Here’s what’s worth doing first and what to consider.
March 28, 2024
I installed and rode with the SKRMOD LBX rack kit on my Surron Light Bee X. Here’s how the modular side racks, rear rack, and handles feel in real riding—plus what to consider before you buy.
December 19, 2023
I installed and rode the Surge Stunts subframe and 12 Bar V2 on my Surron Light Bee. Here’s how it changes balance, wheelies, peg feel, durability, and what to consider before buying.
October 13, 2023
I installed and rode the Torp TC500 on my Surron Light Bee and focused on what matters: installation experience, app usability, throttle feel, and day-to-day ride impressions compared to stock and an ASI/BAC setup.
September 26, 2023
I installed Bayside Bikes’ plug-and-play bottom bracket pegs on my Zooz and tested them for grip, comfort, and control. Here’s what it’s like to ride pedal-less, what to watch for, and who it makes sense for.
September 5, 2023
I built a custom 18” Zooz mini e-bike from a frame kit—18” wheels, hub motor laced to a BMX rim, pegs instead of pedals, upgraded lights, and MT200 brakes. Here’s how it rides, what I’d change, and the parts I used.
September 3, 2023
I replaced the pedals and crankset on my Zooz UU750 with pegs for a mini-bike style setup. Here’s the tool/parts list, the install approach, and what the first ride actually felt like.
July 19, 2023
I tested Green Line Engineering’s 60V 55Ah Touring Battery, BAC4000 power upgrade kit, and Dashboard Integration Kit on a Sur-Ron-style build. Here’s how the drop-in fit, ride feel, tuning profiles, and real-world usability stack up.
July 2, 2023
I converted a Monday Motorbikes Anza to 72v with Detroit Moped Works—bigger hub motor, moto tires, upgraded brakes, and lighting. Here’s how it rides in the real world.
March 27, 2023
From a bar-end mirror and MIPS helmet to a portable electric pump, sling bag, phone mount, and a wireless alarm—these are the Revv 1 accessories I’d buy first for safer, easier daily rides.
February 21, 2023
I upgraded my Onyx LZR Pro to 52V with a Luna Ludicrous V2 controller, external battery setup, and a steel gear swap. Here’s how the install went, how it rides, and what to consider.
January 23, 2023
I installed a FastAce fork and rear shock on my 72v Sur-Ron X after dealing with a tweaked triple clamp and worn suspension. Here’s how it rode on the street, on wheelies, and off-road—plus what I’d consider before buying.
January 16, 2023
I installed a full-twist throttle kit on my Onyx LZR Pro to smooth out the pedal-assist vibe and make wheelies easier. Here’s how the install went, what changed on the ride, and what to watch out for.
November 17, 2022
I built DIY LED handguards for my Sur-Ron using sequential DRL strips and Acerbis X-Ultimate guards. Here’s how the install went, how they look at night, and what to consider before you copy this mod.
October 19, 2022
I installed a full custom Sur-Ron vinyl graphics kit from Volta Supply Co. Here’s how the install went, how it looks day/night, fitment notes, and whether a custom wrap is worth it.
August 14, 2022
I installed a handful of easy Onyx CTY2 mods (lighting, fenders, seat, shocks, spoke covers) and dialed in custom Kelly controller settings for stronger, smoother acceleration and true freewheeling in sport mode.
August 1, 2022
I installed and rode the Flow Wheels 14” supermoto wheelset on my Sur-Ron and tested it as a daily commuter setup. Here’s how it handled, what changed versus 17s, and the one tire-fitment issue to watch for.
July 12, 2022
I converted an Ariel Rider X-Class from 48V to a 72V 3000W setup using an E Street Bikes QS motor kit and a Powerful Lithium 72V battery. Here’s how the install went, what it feels like to ride, and what I’d change.
May 12, 2022
I installed and test-rode Saul’s Upholstery custom Hex Seat for the Sur-Ron X. Here’s how the gel padding, grippy leather, and hex stitching changed comfort and control.
March 28, 2022
I installed and rode Saul’s Upholstery Low Brat Hex seat on my Onyx RCR. Here’s how the genuine leather, foam feel, low height, and hex stitching translate to real-world comfort and control.
February 11, 2022
I installed and tested Green Line Engineering’s GLE Dashboard app with an ASI BAC4000 on my 72v Sur-Ron X. Here’s how the UI, drive modes, regen tuning, telemetry, speed limiting, and real-world feel stack up.
January 2, 2022
I installed the Pretty Bwoy Malibu Sunset Gloss Orange wrap kit on my Sur-Ron to add visibility and personality. Here’s how the install went, what I’d do differently, and how it looks in the real world.
December 30, 2021
I installed Green Line Engineering’s True Fin Enduro heatsink for the BAC4000 on my Sur-Ron, then put it into real-world riding. Here’s how it fits, why it matters for debris/moisture, and the ride vibes that keep people grinning.
December 26, 2021
I swapped my stock Sur-Ron seat for a Saul’s Upholstery custom build with added foam and cafe-racer styling. Here’s how it fit, felt on bumps, and held up to real riding.
September 12, 2021
I built a DIY Sur-Ron X lighting rig with a GritShift light bar, kill switch, low-profile LED signals, and brighter brake lighting. Here’s how the install went, how I routed/cleaned wiring, and what I’d change.
September 6, 2021
I converted my Sur-Ron X into a supermoto-style street ripper with 17-inch wheels, a brighter headlight, a kill switch, a display relocator, and more. Here’s how it changed the ride in the real world.
August 5, 2021
I transformed a base-model Super73 Z1 into my 72V “Z Force 1” and finally got real seat time. Here’s how it rides, what feels amazing, and what you should consider before going 72V.
July 29, 2021
I turned my Super73 Z1 into a 72V experiment with Grin’s Phaserunner + Cycle Analyst, a DD45 direct-drive hub, regen braking, custom enclosure, and full moto-style lighting. Here’s how it rides, what I liked, and what to consider before you go this deep.
June 12, 2021
I built a DIY lighting kit for my Super73 Z1 with a bright halo headlight, turn signals, brake-activated lights, and a horn. Here’s the real-world setup, wiring approach, and what to consider before you build your own.
May 31, 2021
I installed my first round of Onyx RCR mods focused on real-world safety and feel: DatShopNYC lighting + harness, a brighter 5.75" headlight, an integrated rear light setup, a custom seat, handlebar/mirrors, and a (hot take) thumb throttle.
April 23, 2021
I installed a CNC-cut MOLLE panel on my Super73 Z1 to add flexible, low-profile cargo mounting inside the open frame. Here’s how it fit, how it rides, and what to consider before buying.
March 5, 2021
I built a DIY tactical MOLLE panel for my Super73 Z1 using ABS plastic, basic tools, and a printable template. Here’s how it fit, how it rides, and what I’d change next time.
January 2, 2021
I upgraded my stock Super73 Z1 lighting with an affordable 12V headlight and super-bright LED strip tail light—powered by a separate rechargeable battery, so I didn’t have to tap into the bike’s electronics. Here’s what the install was like and how it rides at night.
August 3, 2020
I installed a pedal assist sensor on my upgraded 48V Super73 Z1 and tested PAS levels, including level 5 “god mode.” Here’s how the install went, how it feels on the road, and what to consider vs throttle-only.
July 31, 2020
I rebuilt my Super73 Z1 seat with extra foam and a custom Realtree Camo cover inspired by rare Action Bronson Ultraboosts. Here’s how it came together, how it feels on rides, and what to consider before you start.
July 29, 2020
I upgraded my Super73 Z1 to 48V and put it through real rides. Here’s how the power delivery, speed, range confidence, and daily usability changed—plus what to watch out for.
July 21, 2020
I upgraded my Super73 Z1 to a 48V battery and controller for more power, range, and efficiency. Here’s how the install went, what to watch for, and my first real-world impressions.
July 11, 2020
I installed the Super73 air suspension fork and Shimano hydraulic brakes on my Z1 and took it straight out for a first ride. Here’s how it changed comfort, control, and stopping feel in the real world.
June 22, 2020
I installed and rode with my go-to Super73 Z1 accessories: fenders for mess control, a mirror for traffic awareness, smarter tail lighting, a weatherproof cover, a breathable helmet, and my DIY retro headlight.
June 12, 2020
I built a retro motorcycle-style headlight for my Super73 Z1 using a 6.5" housing and a 1200-lumen bike light. Here’s how it mounts, how it rides, and what I’d do differently.